裝載機廣泛應用于松散貨物和成堆貨物的裝載、提升和運輸，它具有很好的力量與機動性能的結合，有很大的經濟性和實用性。
Loaders widely used in loose piles of goods and cargo loading, lifting and transport, it has a good combination of strength and mobility, there is great economic and practical.
靜壓傳動相對于動壓傳動而言，一方面是它的結構形式可以實現綜合傳動方案，并且允許在現代化輪胎式裝載機中傾斜于或橫向于行駛方向安裝。在閉環回路中，可使轉矩以兩個方向傳遞。另一方面它具有很大的控制范圍，在附加的換檔變速器中可以實現無級或只有少量的幾級換檔。
Hydrostatic transmission with respect to the dynamic pressure transmission is concerned, on the one hand is its structure can achieve a comprehensive drive program, and allows the modern tilt wheel loaders or transverse to the direction of travel on the installation. In closed loop, can transmit torque in both directions. On the other hand it has a large control range, the shift in the transmission of the additional stage can be achieved without or only small amounts of a few levels shifts.
因此，在剎車過程中，能夠產生一個作用于驅動機械的“支撐”，從而可以減少剎車功率和剎車磨損，這些將帶來輪胎式裝載機營運費用的降低。在剎車的同時操作工作液壓，可使回流的能量附加傳給另一個液壓泵和執行元件。靜壓傳動決定性的優點是：它具有各種各樣的開環控制和閉環控制，并且在任何轉速下都能接納可支配發動機功率。因此，在當前和未來的研究發展中，對輪胎式裝載機傳動裝置進行優化設計已成為一種必然趨勢。
Thus, during braking, to generate a driving mechanism acting on the "support", thereby reducing the power brake and brake wear, which will bring lower the operating cost of the wheel loader. In the simultaneous operation of the brake hydraulic work, make another pass additional energy backflow hydraulic pump and actuators. Hydrostatic transmission decisive advantages: it has a variety of open-loop control and closed-loop control, and can be accepted at any speed disposable engine power. Therefore, in the current and future research and development, the right wheel loaders

transmission to optimize the design has become an inevitable trend.
在應用靜壓傳動時，由于它可以自由分配轉速變換和轉矩變換，理論上它可以覆蓋整個發動機的特性曲線族。并且與各式開環和閉環控制相結合，還可以實現噪音和能量消耗的優化。這樣，只要將驅動馬達轉速調控在一個最佳工作點上，司機只通過油門踏板的位置，就可以對加速、牽引力或速度提出工作所需要求。 除了性能上的優勢以外，現代化的、與專門的驅動功率相協調的液壓靜壓傳動方案相對液力變矩器傳動方案在價格上也是極具競爭力的。
In the application of hydrostatic transmission, because it can be freely assigned speed and torque conversion transformation, theoretically it can cover the entire family of characteristic curves of the engine. And with a variety of open-loop and closed-loop control of a combination, may also be implemented to optimize the noise and energy consumption. Thus, as long as the regulation of the drive motor at a speed of the optimum operating point, the position of the accelerator pedal by the driver only, it is possible to accelerate the traction force or speed on its work necessary requirements. In addition to performance advantages, modern, with a special driver coordinated hydrostatic power transmission scheme relative torque converter transmission scheme in the price is also very competitive.

山東裝載機：http://www.jmkey.cn/