1、濟南裝載機配件http://www.jmkey.cn/水箱的水位進行檢查時，發動機熄火，并等待發動機和水箱冷卻后進行檢查，檢查副水箱的水位，一般情況下，不要打開水箱蓋。
When the water level in the tank loader accessories Jinan check engine stall and wait for the engine and check the cooling water tank, water tank inspection deputy, under normal circumstances, do not open the radiator cap.

2、如沒有副水箱，則必須取下水箱蓋，并遵循下列操作說明，水箱水位降低后才能檢查水位，把手靠近發動機和水箱檢查周?chē)諝鉁囟龋荒軐⑹种苯咏佑|發動機和水箱。
If no vice tank, you must remove the radiator cap, and follow these instructions in order to check the water level in the tank after lowering the water level, the handle close to the engine and check the ambient air temperature tank is not in direct contact with the hand engine and tank.

3、我們先松動水箱蓋將水釋放壓力，然后慢慢的取下水箱蓋。
Let loose the water tank lid to release the pressure, then slowly remove the radiator cap.